14k/20 rose Gold filled skullcap, approx. 3.5mm, heavy model

Article code: Zi103-21

14k/20 rose Gold filled skullcap, approx. 3.5mm, heavy model

Method of using skullcaps: 35mm heavy model, Cenfill coated stainless steel wire, Cut the desired length of wire(s). Attach a crimp bead to the wire end, or several wire ends together. Thread a skullcap over the wire(s); the crimp bead falls into the hole of the skullcap. Thread the jewelry according to the pattern. Close with a skullcap over the wire(s), followed by a crimp bead. Place the jewelry in the round shape as it would fit around the neck or wrist. Slide the skullcap. and attach the crimp bead to the wire(s). Check whether the crimp beads are properly pinched. Cut off the remaining wires at least 1mm above the crimp bead. Place a drop of glue in the skullcaps and bend the hemispheres towards each other. Hook the closure onto the hooks and bend it neatly around. This is how you start: Cut a piece of steel wire of about 50 ö 55 centimeters with a pair of cutting pliers. The average length of a short chain is 43-45 cm. If you are making a chain for someone you know, measure the neck size to make the chain 'custom' Start with a skullcap around the end of the beading wire and then slide a crimp bead on it until about 2 mm from the end. Crimp it with flat nose pliers (smooth pliers, not ribbed ones). ) If you do not have smooth pliers, you can also place adhesive tape around the jaws (both sides) of the pliers, this will give you the same effect. Then take the 2 mm piece of wire with the flat nose pliers and bend it over the crimp bead. Then slide the skullcap over it and carefully squeeze it closed with the flat nose pliers. During this last part it is also possible to make an extra loop with the wire through the crimp bead and then squeeze it closed (the excess wire can be cut off). ) Then slide the skullcap over it and carefully pinch it closed with the flat nose pliers. Sometimes it is easier to first press the skullcap closed with your thumb and finger and then use the pliers at the end to close the skullcap properly. of the necklace, Thread the beads onto the steel wire in the order of your design. When you have strung all the beads, put a skullcap at the end and then another crimp bead. Make sure that all the beads fit well together so that you do not have any space left. Crimp it. close the crimp bead, cut the wire and make sure that 2 mm remains. You bend that piece, just like at the beginning of the chain, over the crimp bead and then you slide the skullcap over the crimp bead and press it closed. This last part is It is once again possible to make an extra loop with the wire through the crimp bead and then pinch it closed (the excess wire can be cut off). Then you slide the skullcap over it and carefully pinch it closed with the flat nose pliers. The finishing, confirm At one end of the chain, attach a bending ring to the skullcap and attach the clasp to it. If the skullcap has an open eye, as shown in the photo, you can use round nose pliers to bend the eye slightly closed. Only when the eye is almost closed completely with the flat nose pliers. This way the eye remains nice and round. Attach it to the bending ring with two flat nose pliers with which you bend the rings open from front to back. Not from left to right because they will then lose their round shape and no longer close properly. The same. applies to closing the rings. Bend them towards each other with two pliers. At the other end you can also place a bending ring to secure the chain with the lobster clasp. You can also use a closed ring for this, possibly of a slightly larger size. This makes attaching the chain a little easier The skullcaps, in the sizes we have, can be finished with crimp beads of max 25mm Vermeil skullcap 4mm, Sterling silver skullcap 35mm, Goldfilled skullcap 35mm heavy model, Sterling silver skullcap 35 mm heavy model, See also our other skullcaps.

  • Buy 3 for €1,37 Excl. VAT / €1,66 Incl. VAT and save 15%
  • Buy 6 for €1,21 Excl. VAT / €1,46 Incl. VAT and save 25%
€1,95Incl. tax €1,61Excl. tax
10 pieces in stock
  • Voor 16 uur besteld op ma, wo, vrij
    on Mon, Wed, Fri tomorrow at home
  • Not satisfied, money back
    100% guaranteed
  • Free delivery
    for orders from €60,-
Notify me when is back in stock
Laat je e-mailadres achter en we sturen je een mailtje wanneer dit product weer op voorraad is.